Posted 9/13/2024 21:00 (#10889463 - in reply to #10889399) Subject: RE: 24 row nh3 side dress toolbar..
We've side dressed with a 12 unit Yetter Magnum 60' custom 3 point bar for over a decade now. It folds under 23', 7 bar sections. I run out of my 375hp at about 11 mph.
Our 335 magnum pulled it to 8 or 9mph, but we switched to a 2 track. Much better setup. The 2 track holds a line better.
Whatever you do, you'll (imo) do fine skip row allowing you to pull less shanks.
24 row nh3 side dress toolbar..
