|
Southern Illinois | It should. I think you need to setup the radio either with an ag receiver menu through a display, or via the serial text menu.
After all the radios do all the encoding decoding.
We have an sf3050 base that used to be connected to a radio with an adapter to the 4 pin Deutsch connector used on at stuff.
The 3040 will likely need a firmware update from NavCom Deere to read the newer gps and glonass message types used on all 3000/ 6000/ and 7000 receivers now. Our 3050 did when we first got it. | |
|
Surveying equipment utilizing Deere RTK
