|
Faunsdale, AL | I have a propane conversion on a 350 Chevrolet with the now old TBI fuel system. In my book these were the last simple pickups conversions. The multi-port fuel injection systems and their enhanced computer controls vastly complicated the traditional bolt-on conversions that had been done since the 1940’s.
Anyway there were usually filters from the component manufactures like IMPCO and CENTURY, usually with replaceable elements. While these might still be available, my supplier sells a disposable filter that looks very like a 033 commercial refrigeration component with 3/8 male flare connections on each end. Not sure that it has any desiccant in it, I doubt it since it has never stopped up in the decade or more that it’s been in use. In the case of the use in refrigeration, desiccant would be highly desirable, so I think any receiver-drier you could plumb into the propane supply would do the job. I assume that the XH-7 desiccant that is in use would work just fine. | |
|
Charging AC system with R290
