AgTalk Home
AgTalk Home
Search Forums | Classifieds | Skins | Language
You are logged in as a guest. ( logon | register )

Dialing-in ATU300 on Spracoupe
View previous thread :: View next thread
   Forums List -> Precision TalkMessage format
 
cyclones30
Posted 7/27/2024 11:34 (#10828358 - in reply to #10828118)
Subject: RE: Dialing-in ATU300 on Spracoupe



Midwest

ILSODGRWR - 7/27/2024 08:06
cyclones30 - 7/27/2024 07:46

If you put a piece of tape on the top of the steering wheel when your wheels are perfectly straight, then steer to full lock right and back to full lock left. Then come back to center and is the piece of tape back at the top center? If you do it a few times while sitting or driving, does it come back to center each time? I've seen one or two of those not do this, and that will throw off ATU or really most steering wheel motors. Constantly having to chase since there is no "center" with the steering wheel to come back to 

I will test that today. More than likely it will not return to center. I know with older 3000 and 4000 series Spra Coupes I’ve owned driving down the road I would have to keep turning the wheel slowly to keep it straight.


Some of the old Tyler Patriot were that way too. Most any steering system that moves the wheel will not perform perfectly since it's always scrambling to find center that's moving on it 

Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)