|
Tx | The engine is still in the pickup. I had low oil pressure so I pulled the pan to replace the oil pump pick up tube o-ring. Upon further inspection I saw the cam bearing had moved. Original plan was to pull the cam and replace cam bearings 1,2, and 3.( I know not the right way to fix it but the pickup would only see 5,000 miles per year. 200,000 miles on the odometer now.)
I looked the cam bearing one last time before trying to pull cam, that's when I saw the bearing is bent. It also spun. | |
|
Removing cam from a Chevy 6.0 with a bent cam bearing.
