|
| Just to follow up for anyone else inquiring about a similar issue… my height control module is fine, despite it not being the PN the dealer could find (or being able to find the part number at all…?) I ended up taking the Potentiometer right off the head and plugging it into a 3 pin deutsch splice that is right off the control module on the side of the cab. I was then able to run the head to the ground and control it as I reached through the window and ran the Pot. I am guessing the wiring is damaged somewhere around the rotor cage where it heads up towards the cab. I’ll likely just make a 3 wire jumper harness and have height control in its own loom. Big thanks to everyone who helped with this!! | |
|
Case IH 1660 and Field Tracker AHHC on 1020
