|
Holly Hill, SC | For 17 years I have been formating the cards to FAT32 (JD dealer told me this) with no issues but will try FAT. Also have been using 4 GB cards for 15 years with no issues. I will try putting the reprogram data on a 256 MB card and try it. Also have some 1 GB cards to try.
I tried the monitor again with my full farm data on a 4 GB card and it booted up just fine. 5 days ago it would not boot up with out looping back to shutdown no matter how many tries. Inconsistent.
What are the symptoms when you use a card too large for this monitor? I was told don't go over 4 GB years ago. I download and format at least once a year with no problems. I have had if you don't clean these card out , the monitor can not keep up with the machine. Spraying with 4730 it would be locked up or painting would be a full pass behind. Clean card, no issue. | |
|
- John Deere Field Reprogramming Help needed, 2600 monitor, reboot continuous - shulerfarm : 7/13/2024 19:09
- RE: John Deere Field Reprogramming Help needed, 2600 monitor, reboot continuous - GcDm2010 : 7/14/2024 08:12
- RE: John Deere Field Reprogramming Help needed, 2600 monitor, reboot continuous - 6030Deere : 7/14/2024 08:46
- RE: John Deere Field Reprogramming Help needed, 2600 monitor, reboot continuous - shulerfarm : 7/14/2024 09:10
- RE: John Deere Field Reprogramming Help needed, 2600 monitor, reboot continuous - shulerfarm : 7/19/2024 16:49
- RE: John Deere Field Reprogramming Help needed, 2600 monitor, reboot continuous - JCBFastech : 4/1/2026 01:24
|
John Deere Field Reprogramming Help needed, 2600 monitor, reboot continuous
