|
North Central Kansas | Had a line blow on the bucket tilt on my Q65 Alo Quicke loader. I bought the new hoses and disconnected the old hoses but one of them will not stay coupled. If I switch hose to the other fitting it couples. No hose will couple to the one female fitting. Can you service the coupler or does it have to be replaced.
Update: I took it back apart and it appears that the locking ring in the one couple is missing. Must have came out when I pulled the old one out. To get the female fitting out you have to put an Allen socket in the inside and screw it out.
Edited by kstate90 7/11/2024 21:03
 (IMG_4324 (full).jpeg)
 (IMG_4326 (full).jpeg)
 (IMG_4327 (full).jpeg)
 (IMG_4328 (full).jpeg)
 (IMG_4331 (full).jpeg)
 (IMG_4330 (full).png)
Attachments
----------------
 IMG_4324 (full).jpeg (114KB - 116 downloads)
IMG_4326 (full).jpeg (97KB - 85 downloads)
IMG_4327 (full).jpeg (62KB - 86 downloads)
IMG_4328 (full).jpeg (106KB - 74 downloads)
IMG_4331 (full).jpeg (73KB - 62 downloads)
IMG_4330 (full).png (162KB - 90 downloads)
| |
|
CEJN WEO fittings Alo Quicke loader.
