Near Intersection of I-35 & I-90 Southern Mn. | I'm not familiar with that model but possibly there is a menu item pertaining to that. If any updates were made, that setting may have gotten changed without your knowledge.
With Trimble systems, steering is engaged after a momentary switch is closed for a bit and then released. If you push and hold the switch, steering will not engage until your release the switch. If you just click the switch, the system may not "catch" the transition and refuse to engage.
Try holding the switch for a bit longer before releasing it. Also investigate your wiring and menus. |
Trimble xcn 1050 will not recognize foot switch
