Posted 7/8/2024 07:08 (#10802521 - in reply to #10802512) Subject: RE: Tmx2050 nudge tracks from run screen
Oregon
golfnut - 7/8/2024 07:03
Trimble uses the "trim" feature to move the line small amounts while working. I set mine at 1" usually. They also use the "skip" feature for moving line. I use that feature for going around obstacles or moving over a partial swath.
[/QUOTE
Where is trim and skip?
I want to use my original line going one direction , then move my line 5 feet going the other way ]
Tmx2050 nudge tracks from run screen
