Tipton, KS | chazawalla - 7/7/2024 11:45
I dream of replacing all our guidance displays with Ag Leader, curious if they have a plug-n-play wire harness or if it would be more involved than that. Love the InCommand on our sprayer.
ShopTeacher
"To add to my earlier post, When just the SteerCommand Z2 is hooked to the tractor, the Pro 1200 is still the only ISOBUS display on the CAN, so and implement will show up there, and there only. To get ISOBUS to the InCommand, you need to connect the 6-pin ISO connector on the Ag Leader display cable to the IBBC, preferably with a hi-jack setup to avoid conflicts on the BUS having two displays."
https://talk.newagtalk.com/forums/thread-view.asp?tid=1158100&mid=10... |
Pro 1200 monitor
