|
| Coincidently, found this short video on Glufosinate coverage as well, and was showing the water sensitive paper for an XR, AIXR, and TTI nozzle.
https://x.com/WiscWeeds/status/1801053466271289653
Again, the conditions they were in were decent, and the spray pressure was kept low. Still though, the XR nozzle was probably driftier than ideal.
The TTI was too coarse, and likely to be expected so.
The AIXR was inbetween.
As far as the TT nozzle, it'd be between that XR and AIXR in terms of coverage.
If the AIXR was spraying at a higher pressure, might have been a better inbetween that would compare to a TT.
Anyways, figured I'd share the link to the video on twitter/X for the visual. | |
|
Tips for spraying glufosinate post on soybeans for waterhemp control
