|
Kalona, IA | I'm trying for the 2nd yr to get a new to me planter starter fertilizer working. I have a AL Integra monitor with Aux Input Module which checks out ok. It's connected to a Liquid Product Control Module. Both Modules have a green blinking light. The Aux Input is connected to a Direct Command switch box and it checks OK.
The Liquid Product Control Module also comes up with the correct Ser# when running Diagnostics. It's connected to a DC Motor Driver which I only got to light up 1 time a yr ago which turned the Control valves on /off but never could verify pump motor running.
When I tap Operating Configuration, the Application Rate Module:Not Found, comes on, so it leads to a non working system. Where do I start?
Thanks for any insights! | |
|