|
Eastern Ontario | Hi, I am trying to hook an old Autofarm OnTrac2 up to an Ag Leader Integra (branded Autofarm, if that makes any difference). The Integra is on the latest firmware, and the display cable is new. I have hooked everything up according to the latest Ag Leader instructions to the CAN B (ISO CAN) cable from the Integra, with the Guidance Power into the CAN. I have a flashing light on the ECU, but the Integra doesn't detect it. The ECU2 Power cable has been spliced into a power cable on the machine, and I have voltage at the fuse. I couldn't check the serial cable with my multimeter.
So first question, do I need GPS signal for it to detect the OnTrac2?
Second question, is the ECU2 power cable necessary with power coming from the CAN?
Thanks!
Dave | |
|
Ontrac 2 to Integra
