|
Sheridan Mi | I needed a screen for one just a little while back and searched online. I found two places that had them. Weren't cheap by any means. I got super lucky and found out that one from a Farmhand would work if I cut half and inch off one end. I'd bought a Farmhand at a consignment sale two years ago and got shafted. I pulled that screen out and laid them side by side. One end had a pretty wide spot with no holes. I clamped a piece of angle iron to it, cut it off with a torch then smoothed it with a grinder. It dropped right in. I don't know what model that Farmhand is, but it might help you widen the search since they're so near the same and easy to modify. | |
|
New holland 354 grinder screens
