|
New Zealand | I haven't set up any logging, so won't be able to go back and see. But most likely that is what happened, it would have dropped to a too low number. Especially if the elevation mask is not set to a low number in the 372 to pick up the low altitude satellites. you could easily end up with just 5.
It would probably happen again 24 hours later.
With the Mosaic, under Corrections, Advanced settings, RTCMv3, where you select signal types allowed in the MSM output, untick GPSL2C and select GPSL2PY. Then you should get all GPS satellites and not just the ones you get now with the F9P. From memory that is the important one to do during set up. I think Ardusimple have a guide for setting it up as a base. I can get some more screenshots and send through too at some stage. | |
|
- Working RTK Base Station for less than $1,000 - golfnut : 5/4/2024 12:49
- RE: Working RTK Base Station for less than $1,000 - grower3 : 5/4/2024 21:12
- RE: Working RTK Base Station for less than $1,000 - Phainein7 : 5/5/2024 08:09
- RE: Working RTK Base Station for less than $1,000 - Phainein7 : 5/5/2024 10:15
- RE: Working RTK Base Station for less than $1,000 - case : 5/6/2024 16:17
- RE: Working RTK Base Station for less than $1,000 - nnielsen : 5/9/2024 15:19
- RE: Working RTK Base Station for less than $1,000 - WildBuckwheat : 5/10/2024 09:26
- RE: Working RTK Base Station for less than $1,000 - Phainein7 : 5/10/2024 18:56
- RE: Working RTK Base Station for less than $1,000 - Phainein7 : 5/11/2024 19:03
- RE: Working RTK Base Station for less than $1,000 - Phainein7 : 5/12/2024 06:47
- RE: Working RTK Base Station for less than $1,000 - golfnut : 5/20/2024 19:49
- RE: Working RTK Base Station for less than $1,000 - golfnut : 5/22/2024 11:36
- RE: Working RTK Base Station for less than $1,000 - golfnut : 6/5/2024 13:48
- RE: Working RTK Base Station for less than $1,000 - golfnut : 6/16/2024 14:15
|