Von WC Ohio - 5/14/2024 11:19

Yes, thanks Von! My HI planter has a single hole next to an adjustable slide groove hole that would allow us to add another "support" bolt if needed. I got ahold of a neighbor that said the same thing, as long as you aren't standing on them they stay put. Thanks again for the photos.

 I thought I might have trouble but the single bolt tightened down a lot seems to keep them in place just fine.

There is actually 2 holes already in mine.

I was considering using the 2nd hole with a washer to keep the bracket from moving around.

Thought about another bolt and washer to capture the bracket if needed but never had to do that.

Hope the pictures help explain.

Edit there are also some that mount on the closing wheel bolt itself. Not sure if this is their system or not but you can see them in the pictures at this link.

https://www.360yieldcenter.com/products/360-bandit/

https://www.360yieldcenter.com/wp-content/uploads/2022/05/003A4664_BANDIT_8.14.19-kms-scaled.jpg