AgTalk Home
AgTalk Home
Search Forums | Classifieds (127) | Skins | Language
You are logged in as a guest. ( logon | register )

Working RTK Base Station for less than $1,000
View previous thread :: View next thread
   Forums List -> Precision TalkMessage format
 
nnielsen
Posted 5/14/2024 05:10 (#10739214 - in reply to #10738367)
Subject: RE: Working RTK Base Station for less than $1,000


New Zealand
Are you able to get a rtk fix with the stream the way it is now and hold it?
With your settings, it should work fine. It even seems that you have the complete Glonass correction coming through.

What is your bitrate set to in Strsvr for the input? All your other settings indicate that it should work fine.
But perhaps the F9P is sending a lot of data out, and if you have a low bitrate set in Strsvr, then the content may get lost. There is not a lot of data coming through at the moment, which is why I am starting to think that way.

I think standard for the serial connection is 9600 baud, if it is set at that, try to lift it to maybe 38400.



Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)