|
| There should also a speed cal for how fast the butterfly valve should move. You don't want it too fast as it will go past your target rate and then go back and forth and back. If I remember correctly, there was a 4 digit cal code you entered and one or two of the digits was the speed of the variable rate control valve.
While using just water, you should be able to do a test while sitting on your yard. Enter the speed you expect to drive in the field for a self test, and with the toggle switch for rate 1/2/ manual on manual, you should be able to vary the rate up or down a LOT while turning your booms on/off. | |
|
Raven 450 troubleshooting
