Boone, Iowa | I have been going thru the setup screens and need to do the Smartrax calibration. I am not getting a GPS signal to the Viper 4+. I have a green light on the side of the 700S . In the cabling from the 700s, I have a DGPS out serial connector. I have a Com 2 and a DGPS serial connectors from the adapter cable that goes into the Viper 4+. I tried both, but still not getting GPS.
Edited by jedeka 4/12/2024 17:13
(01C26E8B-8FE0-4AFC-AB21-CFCF120B194F (full).jpeg)
(0A57455B-7F48-4CF5-81B9-B918C50D1EF0 (full).jpeg)
(5F37E6C7-E3EE-415B-863B-C27F4E9C5265 (full).jpeg)
Attachments ---------------- 01C26E8B-8FE0-4AFC-AB21-CFCF120B194F (full).jpeg (73KB - 48 downloads) 0A57455B-7F48-4CF5-81B9-B918C50D1EF0 (full).jpeg (100KB - 44 downloads) 5F37E6C7-E3EE-415B-863B-C27F4E9C5265 (full).jpeg (73KB - 50 downloads)
|