|
Sth Oz | I worked it out, I pressed the button on the right hand side of the dash to get it into the calibration mode. Just done it twice as per instructions. The display is still playing up. The daily working hours reset to 001.0 hours. I'm sometimes missing some bars on the speed display. When it came up with 'cal.' The L was missing and it seemed to be missing the top half of 'run.
Also if I change the constant speed on the next run, the actual speed remains the same at the end of the calibration.
The radar unit itself is firmly mounted with no obvious wiring issues. | |
|
Massey 7495 Speedo Issue
