|
Faunsdale, AL | You can, you just have to plumb the slicer/rinse supply from the outlet of the pump to get the pressure you need. Therefore it won’t be fresh water.
I don’t know how the rinse in an eductor tank is typically plumbed. Thinking it’s from before the Venturi so there’s better pressure for the rinse. So, if you have the eductor in a fresh water line you have fresh water rinse. If it’s on the sprayer pump outlet, your rinse will be the mixed spray solution since that’s what the pump is recirculating. I’ve seen both ways of plumbing one I think.
Edited by ccjersey 2/22/2024 16:56
| |
|
Inductor vs eductor for sprayer chems
