|
West-Central IL | Correct.
An inductor is just the cone with a T at the bottom.
I put a 2" check valve right before mine so nothing goes backwards towards water tanks.
It is visible to the left of the T in the last pic.
Have never had problems about chem through the pumps. (They're rebuildable to for cheap)
I built an extension rod for the bottom valve below the cone so I can open/close from the top by the lid without bending down below. (Why this isn't a factory idea is beyond me) Very easy to mix multiple products and rinse in between.
Edited by Ringo539 2/22/2024 16:07
 (20240222_160419 (full).jpg)
 (20240222_160412 (full).jpg)
 (20240222_160334 (full).jpg)
Attachments
----------------
 20240222_160419 (full).jpg (168KB - 71 downloads)
20240222_160412 (full).jpg (82KB - 77 downloads)
20240222_160334 (full).jpg (151KB - 68 downloads)
| |
|
Inductor vs eductor for sprayer chems
