Posted 2/3/2024 19:47 (#10607405 - in reply to #10607371) Subject: RE: Replacings torque arm bushings on Apache sprayer
Holly Hill, SC
I had trouble like you installing torque rod bushings on a semi once. The second one I did I used an old backhoe bushing to fit over the rubber as I pressed it into the arm. This kept the rubber from bulging and allowing the bushing to continue in without harm. Just found a you tube video on this same concept. Look at about minute 7. https://www.youtube.com/watch?v=7FtxiJRBUpg
Replacings torque arm bushings on Apache sprayer
