|
| Trying to install a low pressure return line on a Case 7240. Had picked up a ‘tee’ fitting a couple years ago to do it, and when using a 7110 with an existing return line for reference, j see that it uses an elbow into the remote block for its return, not the tee into the filter housing.
Low pressure return on both tractors would be used for a sprayer pump, and potentially a white planter air blower.
Do these different return locations make a difference in performance? Is one less favorable for my application?
And for the kind that returns to the hydraulic filter block, assuming this method will be proper for my application- which line does it plumb into? The line towards the front or rear?
Attaching pictures, hoping they come in order.
1- elbow return fitting on 7110 into remote block
2- remote block on 7240- with plug where 7110’s line comes in
3- filter housing on 7240
4- the ‘tee’ I have from Case IH
 (C27EFDCC-67FD-4CD6-9031-7919D987E020 (full).jpeg)
 (31A23ACF-4884-4A03-83F8-666626BB118A (full).jpeg)
 (1C19EDDD-2378-41FF-9E6A-849F2AC708EF (full).jpeg)
 (AB62C143-00B4-4329-8503-6BAA99D00FBE (full).jpeg)
Attachments
----------------
 C27EFDCC-67FD-4CD6-9031-7919D987E020 (full).jpeg (134KB - 74 downloads)
31A23ACF-4884-4A03-83F8-666626BB118A (full).jpeg (141KB - 57 downloads)
1C19EDDD-2378-41FF-9E6A-849F2AC708EF (full).jpeg (169KB - 62 downloads)
AB62C143-00B4-4329-8503-6BAA99D00FBE (full).jpeg (96KB - 65 downloads)
| |
|
Case Boxcar Magnum low pressure oil return
