|
| That should have the circuit board in it on the left side of the dash.............Those things are a PITA because when things start going on them, they cause issues everywhere. Might want to look at that and make sure the dirt isn't piled up at the bottom of it and causing the circuits in the board to corrode. I bought a cheap 4960 and the bottom was corroding and causing light issues because of backfed current or lack of current in a few places, ended up soldiering jumpers on it and got it going again. Ag Express can work on them, but as bad as mine was I would have had a mint in it or they would have told me to toss it. So far it is fine, but I would check there as well. | |
|