Posted 1/8/2024 21:21 (#10564200 - in reply to #6248095) Subject: RE: How to remove side panel on a JD 7210
Middlesex County, Ontario
On the right side of the engine is a black handle, pointing downwards, that you pivot forward to unlatch the hood.
Lift up the hood. Above the front little side panels are small black tabs pointing up that pivot forward to unlatch the little side panels up by the rad. Remove those little side panels.
Now you’ll see where you can use a 1/2” or 13mm socket to undo the large engine side panels.
How to remove side panel on a JD 7210
