|
Mount Vernon, WA | I'm not aware of a power beyond plate, however adding a loader valve without tying up the remotes is easy. All you need is a closed center valve with a load sensing feature. For the inlet to the loader valve simply insert a tee fitting into the remote supply line, and do the same thing for the return. For the load sense line you will need a shuttle tee and tee it into the remote valve load sense plumbing.
While the tractor does use gear pumps, your hydraulic system is largely considered to be closed center because of the remote valve and priority pack configuration. Here's a video of the system put out by Ford Tractor Operations at about the same time your tractor was built: https://www.youtube.com/watch?v=1p53_y2CM8I
| |
|
TW15 power beyond questions
