|
Franklinton, LA | During the past 20 years I have owned Delta, Ridgid and DeWalt bench top planers. The Delta was adequate for a small hobby shop. I kept the Ridgid a few days and returned it to Home Depot for a full refund. For over 15 years I have really enjoyed using my 13" DeWalt #735 bench top planer. I also liked the 15" Grizzly 3 HP planer I had from 2007 - 2013. It was very easy to sell the Grizzly for a good price after I completed some big projects.
EBay offers DeWalt and 3 or 4 brands of planer knives for a good price. My experience has been that the slightly more expensive DeWalt knives from Lowe's, Home Depot and Amazon last a lot longer.
This year I have made over 130 cutting boards to sell at the Mandeville Trailhead Market in Mandeville, LA. I plane the rough beech, cherry, hickory, maple, oak or walnut lumber and rip the boards for pieces to glue together. After the glue dries, I run the cutting boards through the 13" DeWalt #735 planer. I start with a 1/16" cut and then a 1/32" cut. I set the planer on low speed and take a 1/64" cut for the final pass.
I avoid problems with the planer cutting too deep on the ends by using 1 or 2 pieces that extend 3" past the adjacent pieces.
Edited by DRester 12/24/2023 12:41
(_MG_8548 (full).JPG)
(_MG_8551 (full).JPG)
(_MG_8579 (full).JPG)
(_MG_8581 (full).JPG)
(_MG_8612 (full).JPG)
(_MG_8613 (full).JPG)
(PigP_02-01-23 (full).JPG)
(_MG_8858 (full).JPG)
(_MG_8875 (full).JPG)
(ChoppingBlock_T12-23 (full).JPG)
(ChoppingBlock_V12-23 (full).JPG)
(ChoppingBlock_W12-23 (full).JPG)
(_MG_8878 (full).JPG)
(ChoppingBlock_O12-23 (full).JPG)
(ChoppingBlock_P12-23 (full).JPG)
(IMG_8038 (full).JPG)
Attachments ---------------- _MG_8548 (full).JPG (106KB - 169 downloads) _MG_8551 (full).JPG (112KB - 180 downloads) _MG_8579 (full).JPG (112KB - 156 downloads) _MG_8581 (full).JPG (94KB - 180 downloads) _MG_8612 (full).JPG (95KB - 158 downloads) _MG_8613 (full).JPG (95KB - 184 downloads) PigP_02-01-23 (full).JPG (93KB - 160 downloads) _MG_8858 (full).JPG (93KB - 159 downloads) _MG_8875 (full).JPG (80KB - 159 downloads) ChoppingBlock_T12-23 (full).JPG (108KB - 156 downloads) ChoppingBlock_V12-23 (full).JPG (91KB - 160 downloads) ChoppingBlock_W12-23 (full).JPG (92KB - 149 downloads) _MG_8878 (full).JPG (83KB - 159 downloads) ChoppingBlock_O12-23 (full).JPG (93KB - 158 downloads) ChoppingBlock_P12-23 (full).JPG (102KB - 169 downloads) IMG_8038 (full).JPG (116KB - 171 downloads)
| |
|