|
Janesville MN | This was a 16 row. First we put stops on all the wheel cylinders at the correct height. Then we took off the master cylinders and put on rotary flow dividers. We put micro switches on the wheels to replace the switches on the master cylinders. The markers don’t work the way they should this way but with auto steer we haven’t been using them. If they could be hooked to their own circuit I think that would cure this. Haven’t taken the time to figure that out. Years ago there was a dealer in one of the I states that made a kit similar to this. | |
|
JD 7200 Re-Plumbing
