Cornhusker89 - 12/19/2023 20:04 I’m going to be putting up a cold storage building and figuring out what to do for doors. Was looking at doing 2 overhead doors, 30’x18’ & 24’x16’, but then I came across Higher Power Hydraulic Doors. I can do 1 50’x18’ Higher Power door for 1/2 the price of the 2 overhead doors. Their door looks like a good simple design and fairly easy to install. Anybody have one of their doors? I would like to hear your thoughts. TIA Have 3 of them. 2 from 2017 have better controls. We have remotes, but seems like we don't use them. They are not automatic as there are not electric eyes on our door so you need to hold the button. Not that hard to install, but you will need a lull or something to lift into place and tin. Good doors and save money on building because needs no extra reinforcement. Ours we just make extra big holes by the 2 outside post and fill them with cement. We also build a maybe 12 inch deep by 24 inch wide cement trench across the bottom of the door for it to close on and tie it in with the post hole cement. Make sure first rafter is far enough away from end wall so door don't hit it. There was miscommunication when we built last shed and rafter had to be notched out for clearance.
Edited by HFR 12/20/2023 09:43
| 
Higher Power Hydraulic Doors
