|
Iowa | As far as I know it had good oil pressure.
It doesn't have a gauge but it has an idiot light in the corner post that does come on when you turn the key to run position to do a bulb check. Plus since it's electronic there is a little add-on box hanging off the side of the corner post with a check engine and shut engine off light. No warning lights came on we just happened to hear it start knocking while walking around outside the machine while it was running.
I plan on installing a mechanical/master gauge on it during startup to verify what it has.
Will get some bearing pictures on this thread by this evening. Thanks guys. | |
|
Failure analysis in 8.3 Cummins/ CIH combine
