AgTalk Home
AgTalk Home
Search Forums | Classifieds | Skins | Language
You are logged in as a guest. ( logon | register )

engine rebuild cost
View previous thread :: View next thread
   Forums List -> Machinery TalkMessage format
 
School Of Hard Knock
Posted 11/24/2023 22:44 (#10495794 - in reply to #10495576)
Subject: RE: engine rebuild cost


Central ND
Bill the farmer - 11/24/2023 19:03

I am getting antifreeze in the oil pan. I will not use it much. Probably like you said just go down the lane a few times.

Been there, done this with our M tractor. PULL THE OIL PAN OFF in the shop and lay a piece of cardboard on the floor and watch where the antifreeze is coming from .DONT clean any thing off inside the crankcase at first and see if it leaves a clean spot or a clean trail/ milky trail/of antifreeze on the cast iron inside the crankcase like ours did. Our M was VERY VERY slowly dripping coolant out of a camshaft bearing area to which I determined to be a CRACK in the block between the camshaft oil galley and the water jacket. I was told it happens more often when a tractor was used with a loader that stressed the cast iron block.
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)