AgTalk Home
AgTalk Home
Search Forums | Classifieds (42) | Skins | Language
You are logged in as a guest. ( logon | register )

Started on the first crank!
View previous thread :: View next thread
   Forums List -> Machinery TalkMessage format
 
ccjersey
Posted 10/14/2023 16:34 (#10440727 - in reply to #10440673)
Subject: RE: Started on the first crank!


Faunsdale, AL
Can’t give you a year other than 1932-1940 and that it was probably before 1938 because the (incomplete) serial number x year list I have starts with diesel #11 models in 1938 and does not have it.
#11 “Auto Patrol” single drive models included 7D, 7E, 9F, 7G and 7K serial number prefixes throughout that range of years. Also see 9D and 1F listed. These published serial number listings have been noted to have mistakes!

Specs…..Weight 15000#
18’ wheel base 12’ blade
Frame is 9” “ship channel” 28.5#
4 speed trans 10.2 mph max forward speed 1 reverse
46 hp 4 cylinder 4-1/2 x 5-1/2 stroke 350 cubic inch
1100 rpm governed
torque max 238@800 rpm
1F is listed as a #11 as well with same specs so looks like there was an engine swap.

There were also Diesel #11 models with two different 8” stroke 3 cylinders and a (later) 4 cylinder. These had similar hp to the gas versions to start with and up to 60 hp for the later models. I do not see any gas versions listed at the higher hp though it would stand to reason they were similar for the year of production.



Edited by ccjersey 10/14/2023 16:38
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)