|
South Central Wisconsin | Those spreader fins and pans look similar to what a new leader spreader has.
Those spreader boxes are very sensitive to material dropping evenly on both spreader pans, or you can run into an issue like you have.
Using 2 augers to drop onto the pans, maybe the poor pattern side needs to have drop point moved, forward, backwards, or sideways a little.
Is there a hydraulic flow divider in line before your spreader motors? If not you need to add one, the one side could be spinning too fast, causing the pattern.
+1 on replacing all the spreader fins, Those were worn out many tons ago.
Neat little machine! | |
|
Fertilizer spreader question
