|
| Listen to Dr Allis but also only use channel helicals on the separator side. Continue using the flat helicals on the thresher side, the channel helicals are moving the material to the left too quickly. Keep in mind that you now have twice the sharp edges for the material to follow,,where with the the flat helicals you have one edge. We even double stacked the flat helicals on the 2 cage doors above the feederhouse opening. I’ve been around the n,r, and now the s series combines since 1993. If you have been to the gleaner hyper mod website and have read about a guy that goes by HyperHarvest2,,,that is who I’ve worked for since 1993. It’s been fun modding these contraptions for the past 30 years and watching Gleaner finally come with some of these improvements after we had already done them. | |
|
Gleaner R7 P1 processor help
