FarmHawk23 - 9/5/2023 08:36
Ag Leader has an adapter harness to be able to utilize the older valve. You will need to update to the newer controller and new wiring. You can utilize your existing wheel angle sensor as well by switching a couple pins around on the new harness. (Pins A and C I believe)
Your dealer should be able to part out from the vehicle kit the items you will need to make this work.
This is 100% correct. Need the legacy valve cable and highly recommend changing to the new hall effect sensor for the wheel angle sensor.
Edited by andrewsfarmandag 9/5/2023 11:06
| 
Ag Leader SteerCommand Z2
