SE Nebraska, Near Misery and Cans Ass! | Paystar500 - 8/9/2023 21:15 Buy epoxy in a caulk tube, drill hole, squirt in epoxy, insert all thread. I did about 30 holes with ½" all thread, I tried to "pull one" tightened the nut as hard as I could pull on a 12" ratchet, didn't budge. The only thing I would add is blow the dust out and get GOOD althread. Water won't get in and break the concrete like it will with other anchors, Learned that the hard way with cattle waters. |
Best way to fasten to concrete
