|
Jeffersonville, OH | You only have a 2 wire sensor on it now? 9335 shouldn't have that sensor from the factory...9335 has a ACX012850B mounted in the brackets.
To put one on an older Gleaner combine you need a kit to change it over to the old 71391021 we used since the R5 years. However, the Axials, S9 Gleaner, and IDEAL should be able to use the factory sensor on a 9300 Draper.
Your head must have been on an Older Gleaner first, now you have the old 2 wire. If that's the case, you can put the 3 wire on that same bracket, but you'll have to rewire. Do you see the original sensor anywhere? Is there an adapter pigtail harness between the 2 wire and the factory harness?
Chris
Edited by c_mayer 6/18/2023 21:45
| |
|
Gleaner 9335 draper question.
