AgTalk Home
AgTalk Home
Search Forums | Classifieds (101) | Skins | Language
You are logged in as a guest. ( logon | register )

converting a stave silo to bottom unload
View previous thread :: View next thread
   Forums List -> Stock TalkMessage format
 
WJKEIGER
Posted 6/7/2023 21:13 (#10261083 - in reply to #10260694)
Subject: RE: converting a stave silo to bottom unload


nw NC
If the inside surface of the concrete stave silo is in good condition and not damaged by silage acid (causing the silo to be a risk to use), get a top unloader and use the silo. Think of this; 500 tons or more of feed in a 20 foot circle of real estate compared to the amount of ground needed for enough area for same tonnage as determined from chart below. Plus upright silo has a roof, and no mud and snow to fight feeding from it during poor weather conditions. No possibility of varmints tearing open the side of a concrete silo like they could a plastic bag. No plastic junk to dispose of each year. I sold silage to a neighbor from my field, chopped it using my equipment. He rented a bagger and he and a helper did the filling. Made good quality feed but the muddy mess which quickly developed was a problem for feeding. I would never want bags if there was a usable upright available.

Edited by WJKEIGER 6/7/2023 21:22




(Capture silo bag 1 (full).JPG)



Attachments
----------------
Attachments Capture silo bag 1 (full).JPG (58KB - 205 downloads)
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)