|
WC MN | Yes I have lied and moved my working point on a fertilizer spreader when I wasn’t able to get it perfect with my mechanical delays. Same concept. Another thing is have you tried messing with your section control and putting in like 105% overlap? 100% being perfect and every 1% over being 1 foot overlap?
Edit: on sprayer mechanical delay and % overlap have always worked for me. Fertilizer where the product actually lands is where it gets goofy in my experience.
Edited by Bushel 4/25/2023 20:11
| |
|
Ag leader section control turning off early on sprayer- measurements correct
