|
Huron county Mi | No where near tapped out on volume at the speed I spray at. I like the 6-8 range so I am not kicking up a lot of dust behind the sprayer. Currently I use a 04 hypro nozzle and run 6.5-7mph at around 65 ish pounds pressure for fungicide sprays. What are your thoughts for a nozzle combo? Could I run an 02 up front and an 06 on the pwm ?
This is what I have for tips
MR110-04
UR110-06
??110-07 not sure on the letters on these
Hypro 3d’s 04
Not against buying another set of tips to get better coverage
After some playing around with the tip wizard on the computer, not so friendly on the phone.
I’m thinking something like this
Front nozzle MR110-025 and MR110-04 on the pwm nozzle @8mph, should get me in the 60% duty cycle and both right around the 40-50 psi range with each nozzle applying 10 gpa
Edited by Herby 1/24/2023 19:32
| |
|
Nozzle for fungicide
