|
wc mo | There are hyd cylinders for the outside wheels when unfolded. They make it much better when turning on ends set out on 12-30. However, when you are unfolding planter, I had to put shut offs on these cylinders. Lower planter to ground, shut off these two cylinders, raise planter and unfold so wheels were not dragging as you unfold, then turn the two cylinders back on. I was quite a bit younger then and all the walking around the machine did not bother me, probably should go get another one to get more exercise. Wheel bearings are another weak spot. Removed my hubs and drilled out for grease zerk. Too much weight to not be able to grease bearings. | |
|
Black Machine Planters
