AgTalk Home
AgTalk Home
Search Forums | Classifieds | Skins | Language
You are logged in as a guest. ( logon | register )

New holland tg210
View previous thread :: View next thread
   Forums List -> Machinery TalkMessage format
 
farmnmn
Posted 7/6/2017 06:55 (#6108203)
Subject: New holland tg210


Walnut Grove, MN.
is there anything bad about this tractor with 2500 hours on it?
Top of the page Bottom of the page
iowadirtfarmer
Posted 7/6/2017 10:29 (#6108607 - in reply to #6108203)
Subject: RE: New holland tg210


NW Iowa
Nope. TG210 has the mechanical engine fuel injection pump. That is a plus. Drive it and make sure the supersteer axle is tight and has been greased regularly. There are some recommended service at 2500 hours such as setting the valves and changing fluids. The one we have has been a good tractor.
Top of the page Bottom of the page
WIL RedMan
Posted 7/6/2017 10:57 (#6108660 - in reply to #6108203)
Subject: RE: New holland tg210


W IL
The one we used to have was maintenance free. Like was stated make sure the front end has been greased regularly. there are some zerks that are hard to get to. Quite a few on the front of those supersteers.
Top of the page Bottom of the page
TwoGlovesLloyd
Posted 7/6/2017 12:17 (#6108816 - in reply to #6108203)
Subject: RE: New holland tg210


Your biggest problem will be that you only have one.  

Top of the page Bottom of the page
45Deere9670
Posted 7/6/2017 12:27 (#6108833 - in reply to #6108203)
Subject: RE: New holland tg210


St. Joseph, Champaign County, IL
Dad bought one with over 12,000 hours on it. Came from a dairy where it ran the feed mixer. We were told it was started in the morning, and not shut off until evening 7/24/365. The dealer that sold it new and serviced it (and IIRC sold it to dad as well) said it had never had any major work done to it, and engine never touched. Biggest issue we had with it was the splines wore out/ stripped where the engine mated to the drivetrain, after all those hours. Was still running fine when we sold it, mainly because we got a new planter that needed 4 SCVs, the TG210 only had 3, and dad didn't want to spend the $ to add the 4th on a tractor that old.
Top of the page Bottom of the page
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)