Got a new seat cushion for our 4440. What's the secret to replacing it? Not much room to work in the cab or to get hands underneath to remove the bolts. Does that seat possibly slide out somehow? Would be nice to take the entire seat out of the cab to make it easier. Thanks. Got one for the 4650 so they are both the same to change.
Posted 4/15/2015 20:55 (#4518549 - in reply to #4518400) Subject: RE: JD 4440 seat cushion replacement
Sitting in the seat slide it all the way to the rear and you should see two 5/16 bolt heads (1/2 inch wrench) in the base assembly. Remove them. Now slide the seat all the way forward and look behind the seat back and remove the rear two bolts. Remove the seat and base assembly out the rear window. More questions just ask. Hope this helps.
Posted 4/16/2015 06:56 (#4519007 - in reply to #4518879) Subject: RE: JD 4440 seat cushion replacement
Watrous, Saskatchewan
Got it through A&I Parts. Looks good, price was right compared to JD, we will see how long it lasts. I am also an FNA member so got a bit of a discount that way too.
JD 4440 seat cushion replacement
