|
|
NWPA | What has everyone found to work well for cup holders in soundguard cabs. Always looking for a place to put coffee mugs and kids drinks. I see shoup sells a cab caddie, anyone use one? Pics would be great. Thanks
 (IMG_3721 (full).PNG)
Attachments
----------------
 IMG_3721 (full).PNG (56KB - 217 downloads)
|
|
| |
|
NCIN | I have 2 but no pictures. I put them as far back as I could and still open the side window. They are handy but if you have a beverage make sure it has a good lid/cap on it. Not really deep enough for some containers. |
|
| |
|
Lawton MI | +1 |
|
| |
|
fort smith ar | I have one in my 4440 and 4850. Like other said have a lid etc not deep enough but better than nothing. I usually drink cans down half way and it don't spill then.
 (IMG_20171231_141107709 (full).jpg)
Attachments
----------------
IMG_20171231_141107709 (full).jpg (223KB - 129 downloads)
|
|
| |
|
Tennessee | I have the shoup monitor bracket that runs along the right hand side of the cab. I mount a ram cup holder on there. It fits my big yeti cup, and will adjust to different sizes. Works well.
Edited by zkeele 4/24/2018 20:17
|
|
| |
|
Schlegel Farms, Hagerstown Indiana | I have on, but it's mounted on the other side of the cab.....it works fine for me. |
|
| |
|
Elmwood, Ne. Just East of Lincoln | I have one of these in each of my tractors and I wouldn't be without. It is from John Deere. It suction cups to the window. I put them at the bottom of the window sitting on the window frame. Once they are sucked on good they stay on hard. Usually has a 32 oz foam cup all day long and never have had the suction give way.
 (image (full).png)
Attachments
----------------
image (full).png (39KB - 167 downloads)
|
|
| |
|
Central IL | I second this, I really love these. Got mine from Amazon.
BoatMates Cruisin Caddy, White https://www.amazon.com/dp/B001445DT4/ref=cm_sw_r_cp_apa_i_Al-3AbG3R8... |
|
| |
|
West Central IL | A small coffee can bolted to the front of the shifter console works too, can make it any size you want and no spills. Also, another option may be to get one out of a 55 series. They had the ashtray deal with the drink holder on it IIRC only have 40 series left here, the 55's have been replaced. |
|
| |
|
Lynd Minnesota | I also use the suction cup style, but mounted them (in my white tractors) with self tapping screws through the back lip into the steal lip under the windows. |
|
| |
|
Texas | I have the shoup one you linked to in my 4440. It works great for holding my phone and Copenhagen. The cup holders are maybe 1” tall. Nothing will stay upright in them unless you are driving down a smooth road. |
|
| |
|
s.w. ohio | Have one in a 4650 like the OP's picture, works ok, like others have said the drink holders are not very deep. I only take drinks with screw on caps and put a can koozie on the bottom of the bottle to hold it in there tighter. |
|
| |
|
Holy Cross, IA | Have one in every (6) tractor. Just behind the side console. Its one of the first three things we add when we buy a SGB tractor. The other two being a step kit and the front tray. |
|
| |
Soundguard cab caddie/cup holder
