|
|
NNW Nebraska | one remote works fine, the other two remotes work with about 3/4 pressure and 3/4 volume.
bottom out the loader valve, steering, or brakes and the other two remotes go to full volume and pressure.
dealer has replaced the priority valve. Tractor is now at a second dealer, company rep has looked at it and still no one has figured out how to fix it.
Anyone have any ideas?
My brother is needing his tractor back to work and they want to keep the tractor until they have it figured out. It is already been down several weeks. |
|
| |
|
Litchfield, NY | signal check valve ? Is the complete hydraulic system like a CNH MX120/135? |
|
| |
|
NNW Nebraska | Not my tractor, and I am don't know anything about them, but I think the xtx has lots more electronic stuff on it.
|
|
| |
|
Somewhereville, Earth | remote lever is canbus controlling the valve, you mix them up and the big message don't get through on those, if some fiddly fingers been there before and moved all the plugs round nothing works, but hey you got something so i can't be that.,. i assume its the husco valve, they also do break a valve in the spool and sometimes jam....may the force be with you, keep pulling stuff to you find it, sounds like you got a load sense issue, , wish they stuck to building the 4spd powershift MTX, fantastic tractors, really really really like the old mccormicks, they go for ever.
Edited by pudding 10/15/2013 03:59
|
|
| |
|
| what do you consider the old mccoriicks? Any good models of the newer ones, or all bad, since they sell used at a discount. |
|
| |
|
Leeds, North Dakota | Francis, I don't know anything about these tractors but know hydralics, priority valve HMMM, one remote works, something is wrong in valve stack, Scott. |
|
| |
|
Somewhereville, Earth | every thing that they made in doncaster england is what i consider a old one (early 2000's), the CX (dry clutch model)/MC /MTX.(.any the 4spd powershift ones)
discounted?.......i learnt one thing when i lived in america, not all good brands sold well in the US, many good brands failed in the US through lack of support and infrastructure, not because the product was a dud. dad's MTX is coming up 7000hours, at work we have a CX80 and CX90 in the W/S now with water damage to injector pumps, one done 7500hours other done 8500hours......we are starting to see CX's hit 10000hours in utility roles on farms lol, dedicated loader tractors, these units been fantastic tractors here.
generally traded mcCormick sell well, and give little issue, they were pushed and supported well by dealers here, same dealers in the 1980's pushed ISEKI tractors, and even out sold JD in the 0-100hp markets. |
|
| |
|
| any thoughts on the mf 46xx model, arent they iski product? |
|
| |
|
Somewhereville, Earth | would love to see a MF4600 series, agco have grafted a good engine and backend together with a strong front axle, |
|
| |
McCorriick 145 xtx hydraulic problems
