|
|
| I'm looking for the Rate charts
Fertilizer and Lime,
for the following:
United Farm Tools- Model No. 1263
6 ton Lime/Fert. Spreader
Manufactured by:
United Farm Tools, Calhoun Div.
Bethany, Mo.
What I do know:
They Sold out in 1990
A Equip. Divsion in Oelwein, Iowa & kept some parts
Artsway Manuf. (Armstrong, Iowa)
bought U.F.T.'s Shredders & some parts
When I purchased this spreader the charts were
missing, and as of todate I can't find any source
that has any literature that would illustrate these rate
charts.
Anyone have any suggestions?
|
|
| |
|
Eastern Ont | Do not know if this will help We have a model 1055 8 ton 60 ft spread single spinner
Edited by ayrporte 4/21/2011 17:51
 (IMG_2264.jpg)
Attachments
----------------
 IMG_2264.jpg (36KB - 694 downloads)
|
|
| |
|
southern ohio | 
heres the one off of my spreader maybe it will help good luck
forgot to add it has a 12 inch chain
Edited by wingnut13 4/21/2011 20:32
|
|
| |
|
| Thanks for the picture of your rate chart.
I'm not for sure it will help. My spreader has a 24" chain
and gate, dual spinner, with only 45' spread patern.
It's a true lime spreader as well as fertilizer.
I've weighed material and calibrated the gate
the best I can, but at even low speed setting-
just 7/8" opening on the gate, it will dump 350 lb.
of 60 lb./cu.ft. material.
It's incredably narrow gate settings for fertilizer
make is difficult to keep shear bolts in, due to the
tremendous drag on the 2' chain being pulled under
a load of fertilizer.
Again thanks for your attention to my issue.
|
|
| |
|
| Thanks for the picture of your rate chart.
I'm not for sure it will help. My spreader has a 24" chain
and gate, dual spinner, with only 45' spread patern.
It's a true lime spreader as well as fertilizer.
I've weighed material and calibrated the gate
the best I can, but at even low speed setting-
just 7/8" opening on the gate, it will dump 350 lb.
of 60 lb./cu.ft. material.
It's incredably narrow gate settings for fertilizer
make is difficult to keep shear bolts in, due to the
tremendous drag on the 2' chain being pulled under
a load of fertilizer.
Again thanks for your attention to my issue.
|
|
| |
|
North Liberty and South Bend, Indiana | If you still need the rate charts let me know, I have them. |
|
| |
Rate Charts for United Farm Tools - Spreader
