|
Central Ohio | So I replaced the can cable from the row flow to our Gen 2 2020 before we started because we're having intermittent row flow can communication issues.
And it worked fine the first day of planting but started up the second day of planting and it would not see the row flow at all. I have power going to the row flow from the aux power and the green led light on the rowflow wedge/breakput harness is lighting up.
But my 2020 shows no real flow present and when you click on set up and diagnose and then click on row flow everything is blank.
Any ideas what this could be or where to start? I suppose it could be a wire break in the wedge harness? Or the row flow or the 20/20 but I wondered if there was something that was common.
Edited by jbweston 4/28/2021 20:46
| |
|