|
West Central Iowa | I have an early 7120 2wd Magnum that appears to have a rear main seal leaking. I know you can take a drain plug out to see if there is oil in the dry cavity behind the motor. Everything I can find says to take the plug nearest the engine out to see if oil comes. There are 2 plugs very close together on the flat area in the front of the trans housing. Is the one closest to the engine the correct one to remove? I don't want to take the wrong one out and get a bath of hytran! Anyone have a pic or diagram that shows the right one to remove? | |
|
Rear main seal leak on 7120 Magnum
